5G frequency bands in the US: low, mid and high explained

Gene 26-11-13 00:54 5 0

A lot of people think 5G is one single type of signal that works the same everywhere. That is not true. In the United States, 5G frequency bands explained actually runs on three different frequency bands. Each band behaves differently, and that difference explains why you see so many new boxes appearing on streetlight poles around your neighborhood.

The low band goes from about 600 megahertz up to around 1 gigahertz. These frequencies travel a long way and can pass through walls and trees pretty well. A single tower using low-band 5G can cover several miles. The trade-off is that it does not carry as much data as the higher bands. For most people, this means a signal that reaches your house reliably but does not feel dramatically faster than 4G.

The mid band covers frequencies from about 1 gigahertz up to around 6 gigahertz. This is the sweet spot that many carriers have been putting up over the past few years. The signal travels a few miles, still gets through most walls, and carries noticeably more data than the low band. Speed tests on mid-band 5G often feel much faster than 4G. You can download a movie or stream a show with less waiting. This band is what most people mean when they say 5G works well.

The high band, sometimes called millimeter wave, runs from around 24 gigahertz up to 47 gigahertz. This is where things get different. These signals carry a huge amount of data. A millimeter-wave connection can give you speeds that rival a home fiber line. But the signal is weak and fragile. It cannot pass through a tree or a window very well. Rain and even humidity can interfere. The signal travels only a few blocks at best.

Because high-band 5G covers such a short distance, carriers need many more transmitters to reach the same number of people. That is why small cells go up on streetlight poles and the sides of buildings. Each small cell does the same job as a cell tower but covers just a few blocks. At the end of 2024, the wireless industry counted 166,264 small cells in the US out of a total of 447,605 cell sites. The number keeps growing as carriers try to make the high band useful in cities and crowded areas.

All three bands have to follow the same radio-frequency limits set by the FCC. Published measurements taken at street level near 5G sites usually show power levels that are a small fraction of those limits. Right in front of the antennas on a rooftop, readings can be higher. That is why rooftop areas near antennas are often restricted.

If you want to know what kind of equipment is on a pole near your home, the city permit records are where to start. If you have health concerns about radio-frequency exposure, those questions should go to your doctor or to the FCC.

This is covered in more detail at 5G frequency bands explained.

댓글목록

등록된 댓글이 없습니다.